VCXG.2-83UV

Article no.: 11728871

2848 x 2832 px
Sony IMX487
2/3″ CMOS
15 fps
Gigabit Ethernet
Spectrum: Ultraviolet (200–400 nm)

Technical data

show all

Sensor information

Sensor

Sony IMX487

Mono/Color

Mono

Sensor type

2/3″ CMOS

Shutter type

Global shutter

Resolution

2848 × 2832 px

Pixel size

2.74 × 2.74 µm

Exposure time

0.001 … 60000 ms

Data quality (EMVA 1288 typical)

Dark noise

2.5 e-

Saturation capacity

9000 e-

Dynamic range

70 dB

Signal-to-noise ratio

40 dB

Quantum efficiency

53 % @ 536 nm

Acquisition formats

Image formats, interface frame rate max.

Full Frame, 2848 × 2832 px, max. 15 fps
Binning 2×2, 1424 × 1416 px, max. 59 fps
Binning 2×1, 1424 × 2832 px, max. 16 fps
Binning 1×2, 2848 × 1416 px, max. 16 fps

Image formats, aquisition frame rate max. (Burst Mode)

Full Frame, 2848 × 2832 px, max. 16 fps
Binning 2×2, 1424 × 1416 px, max. 58 fps

Pixel formats

Mono8
Mono10
Mono12
Mono12 Packed

Image preprocessing

Analog controls

Gain (0 … 48 dB)
Offset (0 … 255 LSB 12 Bit)

Color models

Mono

Camera features

Basic Functions

Exposure
Gain
Trigger / Exposure Active (Flash)
Binning 2x2
Partial Scan
Offset
Free Running Mode (Live Image)

Auto Functions

Exposure Auto
Gain Auto

Image Pre-processing

Image Flipping (X/Y)
LUT / Gamma

Acquisition / Interface

Burst Mode
Adjustable Framerate
Short Exposure Time Enable
Device Link Throughput Limit
Internal Image Buffer

Synchronization

free running
trigger

Trigger sources

Hardware / Line 0
Software
ActionCommand

Trigger delay

0 … 2 s, tracking and buffering of up to 256 trigger signals

Process Synchronization

Events
Timer
Trigger Delay
Debouncer
Counter
Sequencer
Trigger via Action CMD (GigE)
Additional Output Modes (e.g. Trigger Ready)
Chunk data inside transferred image
Encoder support via Counter End trigger source

Additional Functions

User Set
Integrated temperature sensor (InHouse and Sensor)
Readable additional information (e.g. sensor information)
Save Custom Data

Calibration data

Camera calibration data (user defined storage for intrinsic / extrinsic camera parameters, and geometry distortion values)
Customer data storage (128 bytes user defined)

Internal image buffer

124 MB
8 images (Trigger Mode)
1 image (Free Running Mode)

Interfaces and connectors

Data interface

Gigabit Ethernet, Transfer rate 1000 Mbits/sec, Fast Ethernet, Transfer Rate 100 Mbits/sec, Connector: 8P8C Modular Jack (RJ45), screwable TYPE090 (according to GigE Vision Mechanical Supplement)

Process interface

M8 / 8 pins (SACC-DSI-M8MS-8CON-M8-L180)

Power supply

via M8/8 pins or Power over Ethernet (PoE)

Mechanical data

Lens mount

C-mount

Width

29 mm

Height

29 mm

Depth

49 mm

Weight

≤ 120 g

Material

zinc die casting, baked varnish

Electrical data

Voltage supply range +Vs

12 … 24 V DC (external power supply)
36 … 57 V DC (Power over Ethernet)

Power consumption

Approx. 3.0 W @ 12 VDC and 13 fps
Approx. 3.4 W @ 48 VDC (PoE) and 6 fps

Non-volatile memory

Flash memory size

128 kB

Environmental conditions

Operating temperature

0 … +65 ° @ T = measurement point

Storage temperature

-20 … +70 °C

Humidity

0 … 90 % (non-condensing)

Protection class

IP 40 (with mounted lens and cable)

Digital I/Os

Lines

1 input line
1 output line
2 general purpose lines

Output line sources

Off
Exposure Active
Timer1
Readout Active
UserOutput 1-3
TriggerReady

Conformity

Conformity

CE
RoHS
UL recognized

Software

show all

Software packages

Baumer neoAPI (Windows, Linux, Linux ARM)
- Link
Baumer Camera Explorer (Windows, Linux, Linux ARM)
- Link
Baumer GAPI SDK v2.x (Windows, Linux, Linux ARM)
- Link
Baumer GAPI software examples
- Link
Baumer IPConfig Tool v2.0.2 (Windows)
- Download
Third Party Software
- Link

Downloads

show all

Data sheet

Data sheet – VCXG.2-83UV
- DE (pdf | 743 KB)
Data sheet – VCXG.2-83UV
- EN (pdf | 742 KB)
Detailed data sheet – VCXG.2-83UV
- EN (pdf | 422 KB)

Quickstart

Quick Start Guide VCXG.2
- EN/DE/FR (pdf | 476 KB)

Operating Manual

User’s Guide VCXG.2 / VCXG.2.XC / VCXG.2.I / VCXU.2
- DE (pdf | 12 MB)
- EN (pdf | 12 MB)

Certificates / approvals

CE certification
- EN/DE/BG/CZ/DK/ES/FI/FR/GR/HU/IT/LT/LV/NL/NO/PL/PT/RO/SK/SI (pdf | 188 KB)
UL certification
- EN (pdf | 506 KB)

Tools

Lens selector
- Link
Frame Rate Calculator
- Link
Application Notes
- Link

Drawings

show all

Drawings

The selected altAttribute does not exist!

(png | 98 KB)

Accessories

show all

Power supply

Z-Power Supply Kit LX PX VCXG int.

Article no.: 11122415

universal power supply 12V/2,0A international with adapters for EU, US, UK, AU, KR
power supply and process interface adapter cable for LX, PX and VCXG cameras, length 5,0 m

Starter Kit

VCXG Starter Kit

Article no.: 11165158

GigE PCIe interface board
GigE cable 3,0 m
power supply kit for LX and VCXG cameras
Mounting Adapter Type E
Software (WINDOWS, LINUX, LINUX ARM) via Download
camera not included

PCIe/Adapter

	PCIe Ethernet Server Adapter I210 Article no.: 11137188	Gigabit Ethernet network adapter PCIe x1 (single lane) server adapter single GigE port supports screw lock connectors
	ZVA-Intel_Eth_Serv Adaptr_I350-T2V2 Article no.: 11168452	Gigabit Ethernet network adapter PCIe x2 (dual lane) server adapter single GigE port
	ZVA-PCIe-1672E-AE Article no.: 11168453	Gigabit Ethernet interface board PCIe x4 (quad lane) Dual GigE port Note: 4 lane PCI Express connector required

Housing accessories

	Mounting Adapter Type D (Front) Article no.: 11165176	mounting adapter for VCXU, VCXG and VCXG.I cameras incl. screw (hexagon socket) stable front side mounting
	Mounting Adapter Type E Article no.: 11165173	camera mounting for cameras of the CX and EX series incl. screws (hexagon socket) stable bottom and tripod mounting
	Heat Sink Type C Article no.: 11165171	heat sink for cameras of the CX and EX series incl. screws (hexagon socket) 50 mm x 64 mm x 20 mm
	Adapter CX- / TX-Mount Article no.: 11165175	mounting adapter for cameras of the CX and EX series to reach mounting dimensions of TX cameras incl. screws (hexagon socket)
	Mounting Adapter Type H Article no.: 11191852	camera mounting adapter for cameras of the CX, LX and QX series incl. screw (hexagon socket) rotatable mounting
	Adapter CX- /CX.I-Mount Article no.: 11731597	Camera mounting adapter for VCXG and VCXU cameras incl. screws (hexagon socket) and washers Adaptation of 29 × 29 mm CX cameras to the housing size 40 × 40 mm of the CX.I cameras Enables the use of VCXG and VCXU cameras in IP65/67 enclosure (housing base set 11704019) Can be used as a heat sink for VCXG and VCXU cameras
	Housing base set C V4A VCXG.I r IP65/67 Article no.: 11704019	Stainless steel cylindric housing corpus to modularly house VCXG.I cameras, IP65/57 protection for Pharma as well as Food & Beverage applications Optional: M62 Tube extension with Tube Module 6 mm M62 V4A (11704016), Tube Module 12 mm M62 V4A (11704015) or Tube Module 36 mm M62 V4A (11704014). Use of several tube modules possible. Rear side prepared for mounting via DN50 clamp tube thread: M62 length 90,5 mm To be ordered separately: stainless steel lens protection Tube M62 V4A PMMA (11704017) necessary to close the housing

Lens accessories

	Filter CL/27 (R2) ROT PENTAX Article no.: 11006551	Ricoh color filter (red)
	Filter Pol PENTAX PL27 Article no.: 11092000	Ricoh polarization filter linear filter thread
	ZVI-FILTER POL. PL30.5 C91353 Article no.: 11175428	Ricoh polarization filter linear filter thread M30.5
	ZVI-Filter Pol. PL40.5 C91301 Article no.: 11167713	Ricoh polarization filter linear filter thread M40.5
	ZVL-Adapter S-Mount / C-Mount Article no.: 11167984	Adapter S-mount / C-mount
	ZVF-Filter Holder Mounting Tool Article no.: 11177601	Mounting tool to screw in filter holders
	Close-up ring set ZVS-FP-RGST six-piece Article no.: 11010529	Close-up ring set ZVS-FP-RGST six-piece 0,5, 1, 5, 10, 20, 40 mm
	ZVK-IR/UV Filter Sealing Pack 2.06*13.71 Article no.: 11177567	5 IR/UV cut filters and sealings for VCX cameras with Sony IMX253, IMX304, IMX255 and IMX267 sensors to install a filter in monochrome models The exchange causes a modification of the optical distance and makes the focal flange distance longer. Please check the suitability of the chosen lens.

Lens

	Obj Kowa LM12XC 12mm/f2,0 Article no.: 11092574	Kowa lens 12 mm F 2,0-22 format 4/3" M.O.D. 0,1 m C-mount
	Obj Kowa LM16XC 16mm/f2,0 Article no.: 11092592	Kowa lens 16 mm F 2,0-22 format 4/3" M.O.D. 0,1 m C-mount
	Obj Kowa LM25XC 25mm/f2,0 Article no.: 11092593	Kowa lens 25 mm F 2,0-16 format 4/3" M.O.D. 0,15 m C-mount
	Obj Kowa LM35XC 35mm/f2,0 Article no.: 11092597	Kowa lens 35 mm F 2,0-22 format 4/3" M.O.D. 0,2 m C-mount
	Obj Kowa LM50XC 50mm/f2.0 Article no.: 11166201	Kowa lens 50 mm F 2,0-22 format 4/3" M.O.D. 0,3 m C-mount
	ZVL-Dimension_2.8/8_C Article no.: 11214035	Carl Zeiss lens 8 mm F 2,8-22 format 4/3'' M.O.D. 0,102 m locating screw for aperture and focus C-mount
	ZVL-Dimension_2/12_C Article no.: 11214036	Carl Zeiss lens 12 mm F 2,0-22 format 4/3'' M.O.D. 0,101 m locating screw for aperture and focus C-mount
	ZVL-Dimension_2/18_C Article no.: 11214038	Carl Zeiss lens 18 mm F 2,0-22 format 4/3'' M.O.D. 0,090 m locating screw for aperture and focus C-mount
	ZVL-Dimension_2/25_C Article no.: 11214039	Carl Zeiss lens 25 mm F 2,0-22 format 4/3'' M.O.D. 0,152 m locating screw for aperture and focus C-mount
	ZVL-Dimension_2/35_C Article no.: 11214040	Carl Zeiss lens 35 mm F 2,0-22 format 4/3'' M.O.D. 0,209 m locating screw for aperture and focus C-mount
	ZVL-Dimension_2/50_C Article no.: 11214041	Carl Zeiss lens 50 mm F 2,0-22 format 4/3'' M.O.D. 0,311 m locating screw for aperture and focus C-mount

Network components

GigE Power Switch

Article no.: 11008795

GigE switch
PoE and Jumbo Frame support
4x 1000base-T
DIN rail mounting
operating voltage: 24-48 V; PoE requires 48 V

Cable

	Cable GigE RJ45/RJ45, 3,0 m Article no.: 10170048	Gigabit Ethernet interface cable CAT7 length 3,0 m
	Cable GigE RJ45/RJ45, 6,0 m Article no.: 10141719	Gigabit Ethernet interface cable CAT7 length 6,0 m
	Kabel GigE RJ45s/RJ45, 5,0 m, chain Article no.: 11150185	Gigabit Ethernet interface cable CAT6 RJ45 (screw lock) to RJ45 cable carrier compatible length 5,0 m
	Kabel GigE RJ45s/RJ45, 10,0 m, chain Article no.: 11150302	Gigabit Ethernet interface cable CAT6 RJ45 (screw lock) to RJ45 cable carrier compatible length 10,0 m
	Kabel GigE RJ45s/RJ45, 15,0 m, chain Article no.: 11150186	Gigabit Ethernet interface cable CAT6 RJ45 (screw lock) to RJ45 cable carrier compatible length 15,0 m
	Kabel GigE RJ45s/RJ45, 20,0 m, chain Article no.: 11150188	Gigabit Ethernet interface cable CAT6 RJ45 (screw lock) to RJ45 cable carrier compatible length 20,0 m
	Cable GigE RJ45s/RJ45, 10,0 m, flex v2 Article no.: 11173256	Gigabit Ethernet interface cable CAT5e RJ45 (screw lock) to RJ45 suitable for cable carrier and torsion applications length 10,0 m
	Cable GigE RJ45s/RJ45, 20,0 m, flex v2 Article no.: 11173257	Gigabit Ethernet interface cable CAT5e RJ45 (screw lock) to RJ45 suitable for cable carrier and torsion applications length 20,0 m
	Cable GigE RJ45s/RJ45, 30,0 m, flex v2 Article no.: 11173258	Gigabit Ethernet interface cable CAT5e RJ45 (screw lock) to RJ45 suitable for cable carrier and torsion applications length 30,0 m
	Adapter Cable TX to VCXG VCXU Adapter Cable Article no.: 11701127	Adapter to connect VCXG and VCXU cameras to existing TXG cabling Split cable M8/8-pin female connector to 1x M8/3-pin male connector (power) and 1x M8/4-pin male connector (I/Os) Protection class IP65/IP67 Length 0.4 m
	Z-ESG 32FP0500G Shielded cable 8 wires, female connector, 5,0 m Article no.: 11118810	shielded process interface cable M8/8-pin female connector to open wires cable carrier compatible length 5,0 m
	Z-ESW 31FH0500 90° Cable 8 wires, 5,0 m Article no.: 11105262	process interface cable 90° angled M8/8-pin female connector to open wires length 5,0 m alternative article: CAM8.A8-11232605

Mountings and heat sinks

	Mounting Adapter Type D (Front) Article no.: 11165176	mounting adapter for VCXU, VCXG and VCXG.I cameras incl. screw (hexagon socket) stable front side mounting
	Mounting Adapter Type E Article no.: 11165173	camera mounting for cameras of the CX and EX series incl. screws (hexagon socket) stable bottom and tripod mounting
	Heat Sink Type C Article no.: 11165171	heat sink for cameras of the CX and EX series incl. screws (hexagon socket) 50 mm x 64 mm x 20 mm
	Adapter CX- / TX-Mount Article no.: 11165175	mounting adapter for cameras of the CX and EX series to reach mounting dimensions of TX cameras incl. screws (hexagon socket)
	Mounting Adapter Type H Article no.: 11191852	camera mounting adapter for cameras of the CX, LX and QX series incl. screw (hexagon socket) rotatable mounting
	Adapter CX- /CX.I-Mount Article no.: 11731597	Camera mounting adapter for VCXG and VCXU cameras incl. screws (hexagon socket) and washers Adaptation of 29 × 29 mm CX cameras to the housing size 40 × 40 mm of the CX.I cameras Enables the use of VCXG and VCXU cameras in IP65/67 enclosure (housing base set 11704019) Can be used as a heat sink for VCXG and VCXU cameras

Illumination

	Baumer ZVI-BL-310/27-365HP Article no.: 11729036	Flashable UV LED bar light Wavelength 365 nm Radiation angle 45° Integrated LED controller with 4 operating modes IP54
	Baumer ZVI-RL-80/141-365HP Article no.: 11729040	Flashable UV LED ring light Wavelength 365 nm Radiation angle 45° Integrated LED controller with 4 operating modes IP54

To the top

Industrial cameras / CX series

VCXG.2-83UV

Gigabit Ethernet, 8 Megapixel, Ultraviolet

Technical data

Sensor information

Data quality (EMVA 1288 typical)

Acquisition formats

Image preprocessing

Camera features

Interfaces and connectors

Mechanical data

Electrical data

Non-volatile memory

Environmental conditions

Digital I/Os

Conformity

Software

Software packages

Downloads

Data sheet

Quickstart

Operating Manual

Certificates / approvals

Tools

Drawings

Drawings

Accessories

Power supply

Starter Kit

PCIe/Adapter

Housing accessories

Lens accessories

Lens

Network components

Cable

Mountings and heat sinks

Illumination