技术数据
A端
Head A: Connection
  • M12
Head A: Angle cable outlet
Head A: Gender
Head A: Coding
  • A
Head A: No. of poles
  • 4
Head A: LED
Head A: Width across flats
  • AF14
Head A: Tightening torque
  • 0,6 Nm
Head A: Knurled nut material
  • 不锈钢 (V4A)
Head A: Body color
  • 蓝色
Labeling sleeve side A
B端
Head B: Connection
  • M12
Head B: Angle cable outlet
Head B: Gender
  • 母头
Head B: Coding
  • A
Head B: No. of poles
  • 4
Head B: LED
Head B: Width across flats
  • AF14
Head B: Tightening torque
  • 0,6 Nm
Head B: Knurled nut material
  • 不锈钢 (V4A)
Head B: Body color
  • 蓝色
Head B: Gasket material
  • EPDM
Labeling sleeve side B
电缆
Cable length
  • 100 cm
Shielded
Conductor structure
  • 42 × 0,1 mm
AWG
  • 22
External sheath: Material
  • TPE-S
External sheath: Color
  • 蓝色
Cable diameter
  • 4,7 mm ±5%
Wire cross section
  • 0.34 mm²
Cable: Temperature range (mobile)
  • - 25 ...+ 105 °C
Cable: Temperature range (fixed)
  • - 40 ...+ 105 °C
Operating voltage (only UL listed)
  • 30 VAC/DC
Shielded
Bending radius (fixed)
  • 23,5 mm
Number of wires
  • 4
Number and diameter of wires
  • 4x0.34
Cable length
  • 100 cm
Acceleration (C-track)
  • max. 10 m/s²
AWG
  • 22
Bending radius (fixed)
  • min. 5 × 外径
Torsion speed
  • 最高35次/分钟
Bending radius (mobile)
  • min. 10 × 外径
Cable weight
  • 约 29,7 g/m
Conductor structure
  • 42 × 0,1 mm
Cable diameter
  • 4,7 mm ±5%
Conductor: Material
  • 裸铜
External sheath: Material
  • TPE-S
Insulation: Material
  • PP
No. of bending cycles (C-track)
  • 约 4000000 周期
Nominal voltage
  • 300 VAC
No. of torsion cycles
  • 约 2000000 周期
Paired stranding
Single wire diameter
  • 0,1 mm
Cable: Test voltage
  • 3 kV
Torsion stress in °
  • ±180 °/m
Total stranding
  • 4芯绞线
Travel speed (C-track)
  • max. 3 m/s
Traversing path (horizontal)
  • max. 10 m
Wire cross section
  • 0.34 mm²
Wire processing
Wire diameter incl. isolation
  • 1,27 mm ±5%
External sheath: Color
  • 蓝色
电气参数
Operating voltage (only UL listed)
  • 30 VAC/DC
Nominal voltage
  • 300 VAC
Contact resistance
  • max. 30 mOhm
Operating current per contact
  • max. 4 A
机械参数
Head A: Degree of protection
  • IP65, IP68, IP69K
Head B: Degree of protection
  • IP65, IP68, IP69K
Bending radius (mobile)
  • min. 10 × 外径
Bending radius (fixed)
  • min. 5 × 外径
No. of bending cycles (C-track)
  • 约 4000000 周期
Torsion speed
  • 最高35次/分钟
Torsion stress in °
  • ±180 °/m
No. of torsion cycles
  • 约 2000000 周期
Acceleration (C-track)
  • max. 10 m/s²
Travel speed (C-track)
  • max. 3 m/s
环境条件
Cable: Temperature range (fixed)
  • - 40 ...+ 105 °C
Dragchain capable
Head A: Chemical resistance
  • 耐化学腐蚀性符合ECOLAB测试要求。如果使用其他介质,必须根据具体应用测试材料的耐化学腐蚀性。
Head A: Flame resistance
  • HB (UL 94)
Head A: Oil resistance
  • Good resistance to ASTM 1 oil and mineral oils. Limited resistance to hydraulic oils. If other oils are used, the resistance must be checked in relation to the application.
Head A: Acid and alkali resistant
  • Chemical resistance tested according to ECOLAB. If other media are used, the material resistance must be tested according to the application.
Head A: Pollution degree
  • 3
Head B: Chemical resistance
  • 耐化学腐蚀性符合ECOLAB测试要求。如果使用其他介质,必须根据具体应用测试材料的耐化学腐蚀性。
Head B: Flame restistance
  • HB (UL 94)
Head B: Oil resistance
  • Good resistance to ASTM 1 oil and mineral oils. Limited resistance to hydraulic oils. If other oils are used, the resistance must be checked in relation to the application.
Head B: Acid and alkali resistant
  • Chemical resistance tested according to ECOLAB. If other media are used, the material resistance must be tested according to the application.
Head B: Pollution degree
  • 3
Cable: Acid and alkali resistant
  • Good (analogue FDA 21 178.3620, 178.3297, 177.1520)
Cable: Silicone-free
商业数据
Eclass
  • 27060311

下载
数据表
EPLAN

图纸
Side A: Coding
Side B: Coding
Connection diagram

附件
Torque wrench
The selected altAttribute does not exist! CAM12.W14-11238691

货号: 11238691

  • Wrench
  • M12, AF 14
The selected altAttribute does not exist! CAM12.WS14-11238692

货号: 11238692

  • Torque wrench set
  • M12, AF 14, 0.6 Nm

回到顶部